How to pair and unpair your Tweetycam camera to the monitor

Pairing your camera:

  1. Press Menu to access the menu.
  2. Navigate to the camera icon and press OK.
  3. Select Camera + (highlighted in green) to view a list of 4 camera slots. Paired cameras have a star next to them.
  4. Select the camera slot to pair and press OK.
  5. When prompted, press and hold the pairing button on the back of the camera for 5 seconds or until pairing is confirmed.

Indicators during pairing:

  • Green light on the monitor (top-right corner).
  • Red light on the camera (front).

Unpairing your camera:

  1. Navigate to the camera icon and press OK.
  2. Select Camera - (highlighted in green).
  3. Choose the camera slot to unpair and press OK.
  4. Highlight OK in green and press OK to confirm.

A few handy tips:

  • If you unplug your camera, don’t worry—it’ll stay paired! Just plug it back in to reconnect.
  • You don’t need to unpair a camera to pair it with a new monitor. Simply use the new monitor and go through the pairing steps.
  • On the top-right of your monitor screen, you’ll see a little camera icon showing which camera is currently active.
  • If you’re using Split Screen mode, the cameras are shown in this order: Camera 1 and Camera 2, then Camera 3 and Camera 4. This might help when deciding how to organize your cameras.
  • Keep in mind: one camera can’t be connected to two monitors at the same time.
  • If you have received a replacement monitor, ensure that no star appears next to any camera. If a camera is paired (indicated by a star), unpair it before attempting to pair the new monitor with your existing cameras.

Troubleshooting:

If you’re having connection issues, try this:
  • Reset your monitor.
  • Unplug the camera from power for 5 minutes.
  • Reconnect and go through the pairing process again.

 

Still need help? Email us at support@tweetycam.com.au—we’re here to assist!

How to