Tweetycam uses FHSS technology. This means that our product is a wireless device that works without WiFi or that does not rely on WiFi to transmit signals. Our FHSS monitor subdivides the 2.4GHz frequency band into sub-frequencies from which a signal is transmitted from the camera to the monitor.

Tweetycam's secure system was designed so that hackers are unable to intercept the communication between the cameras and the monitor. FHSS technology works by quickly changing the channel the camera and receiver are using to communicate. Doing so randomly makes it difficult for anyone to casually encounter Tweetycam's signal and listen in or watch.

Tweetycam’s VOX feature (our voice activation feature which detects noise in your baby’s room) has 3 settings (low, medium, and high), allowing you to set the level of noise sensitivity that will activate both the monitor and sound. If no noise is detected the monitor will go into sleep mode.

Yes. Tweetycam allows you to create the perfect ambience for your baby when you select on the monitor a minimum and maximum temperature threshold. If the temperature of your baby’s room moves above or below these pre-set temperature thresholds you will be alerted by the monitor.

Tweetycam uses FHSS technology. This means that our product is a wireless device that works without WiFi or that does not rely on WiFi to transmit signals. In other words, our product does not use Wifi and does not have a phone app.

Tweetycam's secure system was designed so that hackers are unable to intercept the communication between the cameras and the monitor. Instead of an app you get peace of mind knowing you and your baby are fully protected at all times.

One of the great features of Tweetycam is that it gives you wireless coverage of up to 200 meters or 660 feet (without obstruction). Depending on your house, ie. the number of walls and their thickness, this range will vary.

Tweetycam has been tried and tested in a range of Australian homes.

The split screen function on the baby monitor allows you to see two cameras at a time on the large 5' screen. If you have more cameras, you can switch between the additional cameras (e.g. cameras 3 and 4) with the simple press of a button.

With Scan Mode active, the monitor switches from camera to camera so you will hear the sound from each camera at 15 second intervals, ie. Camera 1: scans for sound for 15 seconds, monitor automatically switches to Camera 2: scans for sound for 15 seconds, and continues to scan like this in a loop between all cameras.